Go for LED: Why choose LED for your lighting? – Econnex – Compare Sim and Mobile

Go for LED: Why choose LED for your lighting?

Go for LED: Why choose LED for your lighting?

why choose led for your lighting

LED lighting becomes an essential part of our advanced world and the new trend in lighting technology. It is recommended to use most energy key players and professionals as it is better compared to other lighting’s, but why? As you read this article you will learn the importance and benefits of switching to and choosing LED.


Let’s get to know more about LED.


The basics of LED lighting


LED stands for Lighting Emitting Diode. It is a type of semiconductor device that emits light rays. How do they work? When an electrical current passes through a microchip which converts electricity into light, the result is visible light.

This technology has been around for years and has been widely used for quite some time now as street lights, LED spotlights, rope lights, LED flood lights, and lighting solutions for home and commercial.


Compared to the standard bulb or halogen light, LEDs 
  • Produce light approximately 90% more efficiently than incandescent light bulbs.
  • Are smaller in terms of size, provide unique design opportunities.
  • Consume less energy, resulting in lower utility costs.
  • Are proven to be more durable and reliable as LEDs contain no glass, they are less susceptible to breakage.
  • Last longer. High quality LED lighting last up to 50 times longer than incandescent light bulbs.
  • Do not contain harmful toxins. CFL bulbs contain mercury, which is dangerous to your health when they break.
  • Do not emit UV rays. Long-term exposure to ultraviolet light is not advisable.
  • LEDs emit more Lumens per watt than standard incandescent or fluorescent lighting.


Why should you switch to and choose LED

Energy Efficiency

LEDs use about 50% less electricity than incandescent, fluorescent and halogen lighting. It reduces 70-90% of energy costs compared to a traditional one. LED lights also aim light in a specific direction, which means they emit light in a single direction where fluorescent and incandescent bulbs emit light and heat in all directions. This directional lighting capability reduces wasted light and energy.


Extended Life

Quality LEDs have an expected lifespan of 30,000-50,000 hours or even longer while a typical incandescent bulb lasts only about 1,000 hours, and a comparable compact fluorescent lasts 8,000 to 10,000 hours.

In addition to this, LEDs do not “burn out” or fail, unlike incandescent bulbs which 90% of their energy released as heat. LED does not emit heat the way a traditional bulb does as it has a heat sink, which is a passive device that absorbs the heat produced, this keeps LEDs from overheating and burning out.LED lighting reduces the expenditures of replacing bulbs in commercial and home property.


Cold temperature operation

LEDs are still working efficiently in the cold, unlike fluorescent bulbs which needed a higher voltage to start at low temperatures. LED performance increases when temperatures drop. This makes LEDs are suitable for refrigerated display cabinets, cases, freezers, and cold storage.



Traditional lighting usually contains in a glass which vulnerable to damage. On the other hand, LEDs are not using any glass instead they are mounted on a circuit board and connected with soldered leads similar to small electronic devices. LEDs are breakage resistant and free vibrations and other impacts. 


Instant on

LEDs come on at 100% brightness the time you switched it on compared to most fluorescent and HID lamps that do not provide full brightness the moment they’re switched on. Some requiring three minutes or more to reach the maximum light output. For business and commercial, this can be advantageous during a power outage or any employees open the store during early morning hours when it is still dark outside.


Rapid Cycling and Controllability

Traditional light sources tend to have a shorter lifespan the more they’re switched on and off while LED’s are semiconductor devices and have flashing light displays capability. It makes LED’s unaffected by rapid cycling and well compatible with daylight sensors and controls. Some LED’s can even be dimmed to 10% of light output while most fluorescent s only reach about 30% of full brightness.



When a LED bulb break, you would not worry about your kids, pet or even yourself as they are mercury free. It also made mostly of metal and plastic rather than glass and a fragile filament which is more harmful when damage. Another thing is, a majority of the power used by incandescent bulbs converted into infrared (IR) or radiated heat. Excessive heat and ultraviolet radiation are a hazard to consumer’s health. LEDs emit no IR and UV.


Design Flexibility

LEDs can be combined in any shape to produce highly efficient illumination. It can also be dimmed, resulting in dynamic control of light, color and distribution. Well-designed LED can achieve fantastic lighting effects for the eye, mood, and mind.

Common LED colors include amber, red, green and blue. To produce white light, different color LEDs are combined or covered a yellowish material phosphor. Colored LEDs are widely used as signal lights and indicator lights, like the power button on a computer.



LEDs provide 100 or even up to 200 lumens per watt. In contrast to this, CFLs use about twice the amount of watts and incandescent light bulbs around 10x as much power with only 18-20 lumen per watts.

LED lights to use less power (watts) per unit light (lumen) generated. It means, they are not just much longer-lasting in lifespan but also lower your electricity consumption.


Now that you learn the benefits of LEDs, you can make a wise choice and start saving money on your energy bills. Visit Econnex.


Choose LED for your lighting needs!

Previous Post
Find Out More: Sparking Outlet
Next Post
How to Conserve Energy OUTDOORS?

2 Comments. Leave new

Leave a Reply

Your email address will not be published.

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed